Skip to product information
1 of 3

The CosmoGlo

CosmoGlo Refresh Kit

    Regular price
    $30.00 USD
    Regular price
    $0.00 USD
    Sale price
    $30.00 USD
    Shipping calculated at checkout.
    SHIPPING

    Ships to you within 1 - 2 business days! Free shipping for continental USA.

    To see our available shipping areas,click here.

    Description

    Keep your CosmoGlo shining like new with our Refresh Kit designed to enhance and prolong the life of your light. Whether you're a seasoned CosmoGlo user or just getting started, this kit is a must-have to ensure your light remains pristine.

    What's Included in the CosmoGlo Refresh Kit:

    • Soft Microfiber Cloth
    • Rubber Feet for Your Base
    • Set of Replacement Logos
    • New Rubber Bands for Your Phone Clip
    • Lubricating Oil
    • Set of Wrenches

    Check out our Refresh Kit YouTube Tutorial

    Questions?

    We are here to answer them!
    submit a request here

    Email our support staff at Support@TheCosmoGlo.com

    The CosmoGlo PARTS CosmoGlo Refresh Kit
    The CosmoGlo PARTS CosmoGlo Refresh Kit

    Refresh Kit Instructions

    1. Disassemble Light

    Use the provided allen wrench to remove the base screws to separate the poles from the base.  Gently lay the light on its side on a soft surface such as a towel to prevent scratching.  Remove the barrel screw and separate the halo from the poles.

    2. Check Rubber Feet

    Flip the base over and inspect the underside.  Verify that all four rubber feet are correctly in place.  If any feet are missing, clean the area with water and a gentle detergent before attaching a replacement foot from your refresh kit.

    3. Lubricate Your Light

    1. Oil the Bottom of Inner Pole: Lubricate the bottom ring of the inner pole using the provided oil. Wipe away excess to prevent drips.
    2. Oil Top of Poles: Apply a small amount of oil to the top of the inner pole where it inserts into the halo.
    3. Optional: Oil Halo Joint: If tension is noticed, apply oil to the halo joint, rotating it both clockwise and counterclockwise.

    Remember to rotate the halo an equal number of times in alternate directions to relieve tension on the cords and ensure the longevity of your light during day to day use. 

    4. Reassemble Light

    Use the assembly instructions to carefully reassemble the light, and be sure to tighten all screws fully.  Instructions can be found here.

    5. Cleaning

    Use water and a gentle detergent to clean your light.  Dry each area after cleaning.  Dust, fingerprints, or smudging can be removed with the provided microfiber cloth.  Do not use alcohol-based cleaners or products with harsh chemicals.  Barrier film is a great alternative for sanitizing your light between clients.

    5. Replace Logos

    1. Replace Logos if Needed:
    • Verify logos' condition and replace if necessary using the provided set.
    1. Logo Replacement Steps:
    • Use a credit card or similar material to gently push against each letter's edge.
    • Wipe the area with the microfiber cloth.
    • Peel the new logo and clear film, align, and press down letter by letter.
    • Slowly remove the plastic film from the corner at an angle.

    Watch the Logo Removal and Application video here

    If you have any further questions or need additional assistance, please reach out to our customer service team at support@thecosmoglo.com