Zum Inhalt springen
✨ Customize worry-free with our Halo Accents ✨
Designed to add a touch of magic without causing any wear and tear. Our safe adhesive ensures a secure bond without compromising the exterior of your CosmoGlo light.
How to Apply Your Halo Accent
1. Prepare the Halo Surface:
- Start by wiping the surface of your halo clean using a microfiber cloth to thoroughly remove any dust particles.
2. Align and Prepare the Accent Strip:
- Begin by aligning the accent strip over the top of the halo, ensuring that the pre-cut hole lines up with the halo joint.
- Locate the edge of the strip and cut off any excess material. Keep the cut-off section for potential rhinestone replacements.
3. Attach the Accent Strip:
- Gently peel away 3-4 inches of the protective backing from one side of the accent strip.
- Align the adhesive side of the precut hole with the halo joint and press firmly down to ensure complete adhesion.
- Make sure to line up the edges of the strip with the edges of the halo as closely centered as possible during this step.
4. Repeat for the Other Side:
- Repeat the same process for the other side of the accent strip.
- Once the center is securely attached on both sides, continue pressing down each side towards the ends of the halo.
5. Gradual Backing Removal:
- Gradually peel back more of the backing while keeping the edges as straight as possible.
- If needed, you can lift the accent strip off and reposition it, but be aware that multiple attempts may reduce adhesion or distort the shape of the rhinestones.
Please Note: The adhesive is easiest to remove and adjust within the first 24 hours.
FAQs
Are they removable?
They are repositionable for the first 24 hours. We apply the gemstone paper to a semi permanent vinyl to allow for easier removals. This makes them removable should you choose to change your CosmoGlo halo accent with the seasons or redecorate.
How do I apply them?
Our halo accents have a quick and easy application process that only takes a few minutes.
We recommend you lay the halo accent over your light with the backing till attached so that you can position it to see how it will lay out. To start: Remove the backing and fold the halo accent around the top center pole of your CosmoGo Light. Slowly work down one side at a time keeping the wrap aligned with the lines of the halo. When one side is done, switch to the other and complete. The gemstones are pliable and can easily be moved around for the first few hours, should you need to fill on or correct any spots around the top halo pole.
Do they fit both XL and the Original?
Yes, they fit both halos perfectly
Can I clean them?
We recommend using a spray air duster can to remove dust and particles. You can also use a damp, lint free cloth to retun them to thier original shine.
Can they be returned
If the plastic backing of the adhesive strip of the accent piece has not been removed. We can accept returns up to 30 days past your purchase.
